قالب:Infobox Australian place/doc
 | هذه صفحة توثيق فرعية لـ قالب:Infobox Australian place. تتضمن معلومات الاستعمال، التصنيفات وأي محتوى آخر ليس من محتويات الأصل لصفحة القالب. |
 | This template is used on many pages, so changes to it will be widely noticed. Please test any changes in the template's /sandbox or /testcases subpages, or in your own user subpage. Please consider discussing changes on the talk page قبل تنفيذهم. |
 | Uses Lua: |
 | هذا القالب يستخدم أنماط القوالب: |
 | هذا القالب يضيف وصفاً قصيراً مـُوَلـَّد تلقائياً . |
Purpose
{{Infobox Australian place}} is used to add infoboxes to articles on places in Australian states and territories. It is not limited to populated places such as cities, towns and suburbs, but may be used on any place including regions, local government areas, cadastral units and some areas that do not fall into any of the preceding descriptions and for which no other infobox is appropriate. It is the standard infobox used in Australian articles. Australian articles using {{Infobox settlement}} directly should be converted to use this infobox.
This template once supported use for protected areas such as national parks. This is no longer the case, please use {{Infobox protected area}} instead.
The infobox has been extensively customised for Australia and includes automation that results in some parameters being redundant to other parameters. For example, if population density (in the |density= parameter) is not specified, this will be automatically generated based on the |pop= and |area= parameters. It is therefore important to read parameter descriptions thoroughly, to avoid unnecessarily providing redundant or incorrect information.
For infoboxes that require reformatting, general cleanup or addition of missing parameters, Template:Infobox Australian place/cleanup can be substituted. This will reformat the infobox and remove invalid parameters.
Usage
To use this template
- Copy the relevant blank template from the Blank infobox page into the beginning of your document, remembering to put the code on the line directly before the start of the article's lead.
- Enter values for the parameters as outlined under § Parameters, particularly
|type=and|state=. Parameters left blank will automatically be hidden. - Preview the page with your edits.
- Save the page with an appropriate edit summary (e.g., "Added {{[[Template:Infobox Australian place|Infobox Australian place]]}}", which will display as, "Added {{Infobox Australian place}}" ).
Examples
- Examples of this template can be found on the examples page.
Parameters
Both type and state are required parameters. All other parameters used by this template are optional.
Required
These parameters must be set for every infobox as they affect the behaviour of many other parameters.
The |type= parameter sets up the template for a specific type of place. It regulates which parameters can be used. The entered values for this parameter should be plain, unlinked text.
| Accepted value | Description |
|---|---|
city
|
A city. |
suburb
|
A suburb, a form of administrative region generally used in cities and towns. |
town
|
A town or other settlement. |
lga
|
An Australian local government area (LGA) - a particular form of administrative region, used to create local governments. Many LGAs will use terms such as "Town of", "District Council of", "Shire of", "City of", etc., in their names.
Note that the ACT does not have any system of local government, and therefore does not have LGAs. |
region
|
|
cadastral
|
|
other
|
|
| undefined | Occurs when the parameter has been left blank. |
The |state= parameter defines the state or territory of the place. It sets up the template to refer to and link to the correct state or territory throughout. The entered values for this parameter should be plain, unlinked text; for consistency, lower case is preferred. If the parameter is left blank, the infobox will default to au (i.e., Australia).
| Accepted value | State or territory |
|---|---|
act
|
Australian Capital Territory (ACT) |
nsw
|
New South Wales (NSW) |
nt
|
Northern Territory (NT) |
qld
|
Queensland (Qld or QLD) |
sa
|
South Australia (SA) |
tas
|
Tasmania (Tas or TAS) |
vic
|
Victoria (Vic or VIC) |
wa
|
Western Australia (WA) |
jbt
|
Jervis Bay Territory (JBT) |
ni
|
Norfolk Island (NI) |
au
|
Australia - use when no other value is applicable. |
Optional
| Parameter | Available for|type=
|
Description | Notes | Potential sources | Values |
|---|---|---|---|---|---|
| Names | |||||
| name | all | Name of infobox's place | If not present or blank, the title of the article containing the infobox will be used instead. | Plain text. | |
| indigenous_name first_nations_name |
all | Place name in local Indigenous Australian language(s) | Name of the place in the local Aboriginal or Torres Strait Islander language, if different from name.
The parameter native_name is deprecated for this useage (but still technically supported) in this template. Native is a deprecated archaic term in the Australian context. Please don't use the term in articles. |
plain text, or use {{llang}} (preferred).
If there are names in multiple Indigenous Australian languages, {{llang}} can be used multiple times. Add <ref></ref>(s) with citation(s) where possible. | |
| native_name | all | Place name in a non-indigenous language | Name of the place in a local non-indigenous language, if different from name.
Native is a deprecated archaic term in the Australian context. Please don't use the term in articles. |
plain text, or use {{llang}} (preferred).
Add <ref></ref>(s) with citation(s) where possible. This parameter will not be recognised if indigenous_name or first_nations_name have been used. | |
| native_name_lang | all | ISO 639-1 code, e.g. nys for Noongar, for the Indigenous Australian language, if available | Prerequisite parameters:
|indigenous_name= parameter.Native is a deprecated archaic term in the Australian context, but is used in this template for consistency with other templates. Please don't use the term in articles.
|
plain text | |
| Images, logo, maps | |||||
| image | all | Image of the place | For multiple images, use {{multiple image}}, eg:
|image= {{multiple image
| layout = vertical
| image1 = first image name
| image2 = second image (or map) name
}}
|
filename | |
| image_upright | all | Width of image of the place (in relation to default thumbnail size) | The size should not be set to a value that would result in an image width greater than 300px. See help below for guidance on determining the value to be used, and WP:IMGSIZE for rationale. | Unformatted number. If not specified, the image width defaults to 1.23, which is approximately 270px for readers that haven't changed their default thumbnail size at Special:Preferences.
| |
| image_alt | all | Alt text for the image | wikitext (can contain links) | ||
| caption | all | Caption for the image | wikitext (can contain links) | ||
| logo | all(recommended for lga) | Logo of place | For LGAs, these can be sourced from individual LGA websites. | Image link (do not include "File:" or "Image:") | |
| logo_upright | all(recommended for lga) | Width of logo (in relation to default thumbnail size) | The size should not be set to a value that would result in an logo width greater than 300px. See help below for guidance on determining the value to be used, and WP:IMGSIZE for rationale. | Unformatted number. If not specified, the logo width defaults to 1.23, which is approximately 270px for readers that haven't changed their default thumbnail size at Special:Preferences.
| |
| logo_alt | all(recommended for lga) | Alt text for the logo | Wikitext, can be wikilinked. | ||
| coordinates | all | Displays coordinates of the place. Triggers a location map to be automatically generated, which can be adjusted in various ways. | For coordinates, use {{coord}} with display=inline,title. Please do not be overly precise.
The default location map will be of the state, with a pushpin identifying the position specified in {{coord}}. For parameters to adjust or toggle the map, see § Location map generated by coordinates. A second map can be generated using wikidata as well (see § Location map generated by wikidata). |
Example:{{Coord|32|45|41.3|S|151|44|38.6|E|type:city_region:AU-NSW|display=inline,title}}When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.
| |
| coord_ref | Recommended for all | Footnote demonstrating the coordinates value | Prerequisite parameters:
|
wikitext (can contain links)Best when used with <ref></ref> tags and a citation template | |
| Location | |||||
| region | all(recommended for city, suburb, town, lga, cadastral) | Name of region the place is in | Plain text, can be wikilinked. If no wikilink is given, the text will be automatically wikilinked. | ||
| city | Recommended for suburb | City name | Name will be auto-linked if no wikilink is defined.In some cases it may be desirable to include the name of a non-city here. | List of cities in Australia | plain text, may be linked. |
| lga |
|
Name of the local government area | NSW Geographical Names Board | Plain text, may be wikilinked. If no wikilink is given, the text will be automatically wikilinked. | |
| lga2lga3lga4lga5 |
|
Names of additional LGAs | If more than 5 LGAs are required, use {{plainlist}} as necessary. See Hunter Region for an example. | Plain text, can be wikilinked. If no wikilink is given, the text will be automatically wikilinked. | |
| first_peoples1first_peoples2 | Names of first nations (Aboriginal or Torres-Strait-Islander) people(s) who occupied the place prior to European settlement, or who are the traditional custodians/owners of the land. | See § First peoples below | Plain text, can be wikilinked. | ||
| first_peoples1_footnotesfirst_peoples2_footnotes | References demonstrating the named first-nations peoples' affiliation. | See § First peoples below | Plain text, can be wikilinked. If no wikilink is given, the text will be automatically wikilinked. | ||
| location# (up to location5) | all(recommended for city, suburb, town) | Specified location(s) to display the distance and direction from | Normally other cities or population centres.See § Location#, Dist# & Dir# below | Maps such as Google Earth | Plain text, may be wikilinked. If no wikilink is given, the text will be automatically wikilinked. |
| dist# (up to dist5) | all(recommended for city, suburb, town) | The distance by road (not direct) from the specified location(s) | Distance by road, not direct.See § Location#, Dist# & Dir# below | Maps such as Google earth, whereis, Visit Victoria route planner | unformatted number in km |
| dir# (up to dir5) | all(recommended for city, suburb, town) | The direction (preferably cardinal) from the specified location(s) | See § Location#, Dist# & Dir# below | Plain text. Normally a cardinal direction, either as an initialism (e.g. N, SE, NNW) or the word in lower case (per MOS:COMPASS; e.g., north, south-east, north-north-west).
| |
| Dates | |||||
| established | all | Date the place was established | Options include:
| ||
| established_footnotes | all | Reference demonstrating the establishment date | wikitext (can contain links)Best when used with <ref> </ref> tags and a citation template | ||
| gazetted | all | Date the place was gazetted | date | ||
| abolished | all | Date the place was abolished | If the exact date is unknown, a year will suffice | date | |
| Government | |||||
| seat | all(recommended for lga) | Council seat of the LGA | Plain text, can be wikilinked. If no wikilink is given, the text will be automatically wikilinked. | ||
| mayortitle | lga | Title of the mayor | Wikitext (can be wikilinked), or blank.
If left blank, will default to "Mayor". | ||
| mayor | lga | Mayor of the LGA | Name of the mayor only. Do not include titles, postnominals or political party information. | Plain text | |
| stategovstategov2stategov3stategov4stategov5 | all | The place's state government electorate(s) | Plain text, can be wikilinked. | ||
| fedgovfedgov2fedgov3fedgov4 | all | The place's federal government electorate(s) | Plain text, can be wikilinked. | ||
| Area, elevation | |||||
| area | all | The area of the place | Raw unformatted number in km2 (eg: "1234.5" NOT "1234.5 km2") | ||
| area_footnotes | all | Footnote demonstrating the area | wikitext (can contain links)Best when used with <ref> </ref> tags and a citation template | ||
| elevation | all(recommended for suburb, town) | The elevation, measured from sea level in metres | unformatted number in metres | ||
| elevation_footnotes | all(recommended for suburb, town) | Footnote demonstrating the elevation | wikitext (can contain links)Best when used with <ref> </ref> tags and a citation template | ||
| Population | |||||
| pop | all | Population statistic (use approximate if |type=region)
|
If left empty, population data will be displayed from Wikidata (for appropriate geography)See § Population from Wikidata below. | Search census data | Number. should be plain, either with or without a comma. i.e. 12345 or 12,345
Do not add anything else, including years or references. |
| pop_year | all | Year applicable to the population figure | Prerequisite parameters:
|
Search census data | Number. When the population is for a census year, use {{CensusAU}} |
| pop_footnotes | all | Footnote demonstrating the population statistic | Prerequisite parameters:
|
Search census data | wikitext (can contain links)Best when used with <ref></ref> tags and {{Census 2021 AUS}} |
| pop2 | all | Second population statistic (use approximate if |type=region)
|
See Clarence Town, New South Wales for an example of when a second population figure is useful. | Search census data | Number. Should be unformatted, and can be with or without a comma. i.e. 12345 or 12,345
Do not add anything else, including years or references. |
| pop2_year | all | Year applicable to the second population figure | Prerequisite parameters:
|
Search census data | Number. When the population is for a census year, use {{CensusAU}} |
| pop2_footnotes | all | Footnote demonstrating the second population statistic | Prerequisite parameters:
|
Search census data | wikitext (can contain links)Best when used with <ref></ref> tags and {{Census 2021 AUS}} |
| poprank | city | population rank within Australia | List of cities in Australia by population | Use eg: '1st', '15th' | |
| density | all(recommended for city, region) | population density | Will auto-calculate if both pop and area are defined | unformatted number, in people/km² | |
| density_footnotes | all(recommended for city, region) | population density footnote for references | wikitext (can contain links)Best when used with <ref></ref> tags and a citation template | ||
| Postal, timezones | |||||
| postcode | all(recommended for suburb, town) | Postcode(s) for the place | Australia Post postcode search tool | number | |
| timezone | all | Timezone of the place | Time in Australia | Plain text, linked. Either the full name or the abbreviation can be used (e.g., either [[Australian Western Standard Time]] or [[Australian Western Standard Time|AWST]] can be used).The utc parameter must also be set.
| |
| utc | all(recommended for city, suburb, town, lga, region) | UTC offset of the timezone | The standard values are:
|
"+" followed by number, e.g., +8:00 (for AWST)
| |
| timezone-dst | all | Daylight saving timezone (where applied) | Daylight saving time in Australia | Plain text, linked. Either the full name or the abbreviation can be used (e.g., either [[Australian Eastern Daylight Time]] or [[Australian Eastern Daylight Time|AEDT]] can be used).The utc-dst parameter must also be set.
| |
| utc-dst | all(recommended for city, suburb, town, lga, region) | UTC offset of the daylight saving timezone | The standard values are:
|
"+" followed by number, e.g., +11:00 (for AEDT)
| |
| Cadastral | |||||
| county | all(recommended for city, suburb, town, lga) | Name of the county (a type of lands administrative division) | Not used in all areas. | NSW Geographical Names Board | Plain text, can be wikilinked. If no wikilink is given, the text will be automatically wikilinked. |
| parish | all(recommended for city, suburb, town) | Name of the parish (a type of lands administrative division) | Only used in NSW, Qld and Vic. | NSW Geographical Names Board | Plain text, can be wikilinked. |
| hundred | cadastral | Name of the hundred (a type of lands administrative division) | Not used in all areas. | Plain text, can be wikilinked. | |
| former_hundred | cadastral | Former name of the hundred (a type of lands administrative division) | Not used in all areas. | Plain text, can be wikilinked. | |
| division | cadastral | Name of the division (a type of lands administrative division) | Only used in NSW - lands administrative divisions of New South Wales | Plain text, can be wikilinked. | |
| Website | |||||
| url | all(recommended for lga) | URL for the place's individual website | Do not use for former LGAs | Bare url, e.g., http://www.example.com | |
| Climate | |||||
| maxtemp | all | Maximum average annual temperature | Bureau of Meteorology's climate data | unformatted number, in °C | |
| maxtemp_footnotes | all | Footnote demonstrating the maximum temperature | Bureau of Meteorology's climate data | Wikitext, can contain templates, html, wikilinks, external links, etc.Best when used with <ref> </ref> tags and a citation template | |
| mintemp | all | Minimum average annual temperature | Bureau of Meteorology's climate data | unformatted number, in °C | |
| mintemp_footnotes | all | Footnote demonstrating the minimum temperature | Bureau of Meteorology's climate data | wikitext (can contain links)Best when used with <ref> </ref> tags and a citation template | |
| rainfall | all | Average annual rainfall | Bureau of Meteorology's climate data | unformatted number, in mm | |
| rainfall_footnotes | all | Footnote demonstrating the annual rainfall | Bureau of Meteorology's climate data | wikitext (can contain links)Best when used with <ref> </ref> tags and a citation template | |
| Adjacent Places | |||||
| near-nwnear-nnear-nenear-wnear-enear-swnear-snear-se | all(recommended for suburb, lga) | Neighbours which share borders with the place | It is best when all listed neighbours are of the same type (e.g., suburbs around a suburb). When the place of a neighbour is instead taken by something like an ocean or another state/territory, include it in italics. | Plain text, linked. Can be formatted.
For example, the LGA of the City of Melville has a neighbour to its east, the City of Canning. Canning would be entered as | |
| near | all(recommended for lga) | Central to neighbours | Replaces name in centre of table of near-* values. (Can also be used without any near-* e.g. to specify a section link to the main text for further information. Use {{slink}}.) | plain text, link | |
| footnotes | all | General footnotes, used to provide footnotes supporting information in parameters without a dedicated parameter for footnotes. | wikitext (can contain links)Best when used with <ref> </ref> tags. | ||
| _noautocat | all | Prevents automatic categorisation | This should only be used when absolutely necessary, when the automatic categorisation built into this template causes errors. | If the automatic categories need to be suppressed, |_noautocat= should contain text explaining why.Leave blank to categorise the article. Note that this does not suppress the tracking categories. | |
Location map generated by coordinates
The recommended and most common location map is auto-generated by |coordinates=, but can be toggled off using |map_type=nomap (see in table). All of the following parameters require |coordinates= to be properly set using {{coord}}.
| Parameter | Available for |type=
|
Description | Notes | Values | |
|---|---|---|---|---|---|
| coordinates | See § coordinates for details | ||||
| map_type | all | Toggles whether a location map is automatically generated | Prerequisite parameters:
|
Available options are:
| |
| force_national_map | all(recommended for city, region) | Forces location map to use a map of Australia as a whole | Prerequisite parameters:
|
yes to force map of Australia, or leave blank. Plain text, do not link
| |
| use_lga_map | all(recommended for suburb, lga) | Forces location map to use the LGA's map which is available to Module:Location map | First confirm whether there is a map for that LGA - see Category:Australia location map modules.Prerequisite parameters:
|
yes to force map of the LGA, or leave blank
| |
| alternative_location_map | all | Forces the location map to use an alternative map available to Module:Location map | Can be used to display an LGA map in infoboxes where |lga= cannot be set.Prerequisite parameters:
|
Name of the alternative map (Category:Australia location map modules includes all available maps) | |
| relief | all | Forces relief-style map, if available | Prerequisite parameters:
|
yes to force relief-style map, or leave blank
| |
| map_alt | all | Alt text for the location map | Prerequisite parameters:
|
wikitext (can contain links) | |
| pushpin_label_position | all | Position of the pushpin's caption, in relation to the pushpin | Prerequisite parameters:
|
left, right, top, bottomIf this is not set, the default is left
| |
| pushpin_map_caption | all | Caption for the location map | Prerequisite parameters:
|
Plain text or wikitext | |
Mapframe map
A second map can be generated by {{Infobox mapframe}}. This map can also function when there are no local |coordinates=, by using those defined at Wikidata. It will display below the § Location map generated by coordinates map.
Wikidata can have a قالب:Wdp property or a قالب:Wdp property attached, allowing this map to show the shape of the local area, in the map thumbnail as well as in the expanded view available after clicking the thumbnail.
Note: if the resulting map is incorrect in any way, especially if it's just a light-blue square, the likely cause is problems with the OpenStreetMap data. See Module talk:Mapframe/FAQ question 4.
| Parameter | Available for |type=
|
Description | Notes | Values |
|---|---|---|---|---|
| local_map | all | Enable map of local area, as defined in Wikidata | This map will display below the map generated by |coordinates= if that map is also present. For the map to display properly, the current article must be connected to a Wikidata entry which is in turn associated with an OpenStreetMap relation or a geoshape.
|
yes will display the map
|
| zoom | all | Change zoom size of local_map | For more information, see {{Infobox mapframe}} instructions.Prerequisite parameters:
|
Numeric value between 1 and 18. If left blank, zoom size defaults to 10.
|
| local_map_id | all(recommended for other) | Wikidata ID for the place, if the infobox is in an article that does not connect to the place's wikidata entry | Search Wikidata for an IDPrerequisite parameters:
|
An unlinked wikidata ID, e.g. Q595259 for Raymond Terrace. The ID will begin with "Q".
|
| local_map_caption | all | Optional caption for the local area map | Prerequisite parameters:
|
Plain text or wikitext |
For a complete list of available mapframe parameters, please see {{Infobox settlement#Mapframe maps}}.
Notes
Calculating "image_upright"
The |image_upright= parameter, and |image2_upright= and |logo_upright= where applicable, are provided so as to facilitate the use of scalable images in this infobox, in accordance with the instructions at WP:IMAGESIZE, which advises against the use of "px" (for example: thumb|300px), as this forces a fixed image width.
Scalable images respect the user's base preference, which may have been selected for that user's particular devices. Module:InfoboxImage, which is used in this infobox, accommodates the use of scaling. However, setting the appropriate scale is slightly more complex than setting a raw "px" value. This guide provides a quick conversion table to make the process of setting a scale easier. It is based on a default thumbnail setting of 220px.
170px?upright=0.75180px?upright=0.8190px?upright=0.85200px?upright=0.9210px?upright=0.95220px?upright=1230px?upright=1.05240px?upright=1.1250px?upright=1.15260px?upright=1.2270px?upright=1.23280px?upright=1.25290px?upright=1.3300px?upright=1.35
Footnote and reference parameters
Any references to support a parameter reserved solely for a numeric value should be placed within the respective |..._footnotes= or |..._ref= parameters. For example, place the reference used for the area of City X in the |area_footnotes= parameters and not in the |area= parameter. Otherwise, an error may result.
Unformatted numbers and expression errors
Certain parameters require numeric values to be entered in an unformatted/raw fashion—i.e. 1000.0 not 1,000.0. If an expression error is present, simply remove any commas or spaces from the number.
First peoples
Parameters:
|first_peoples1=,|first_peoples2=
- use these parameters where the place is within or immediately surrounded by an area affiliated with a group named in the sources (see below)
- filling first_peoples2 is valid for large-area places (eg: cities) that have different custodians in different parts, or where affiliation is acknowledged as shared
- if there are more than 2 groups sharing affiliation to the place, or there is any level of dispute or ambiguity, use 'see {{section link}}' to refer to a discussion of the details within the article, or to link to details elsewhere. If there is no detailed discussion to refer to, and there is any dispute or ambiguity, do not fill these parameters.
|first_peoples1_footnotes=,|first_peoples2_footnotes=
- Common sources would include:
- Native Title Determinations under the federal Native Title Act
- Indigenous Land Use Agreements made under the same act
- Declared Indigenous Protected Areas
- Other areas defined under state law (eg: Aboriginal Heritage Acts in various states)
- State government websites where traditional ownership is formally recognised
- Anthropological or similar information about pre-european-settlement occupation or current affiliation with the land
- Note that acknowledgements of and welcomes to country are not generally regarded as reliable sources for the name(s) of first peoples affiliated with a place.
- For quick creation of references for first peoples, the following templates can be used in
|first_peoples1_footnotes=and|first_peoples2_footnotes=.
- For example, use
| first_peoples1_footnotes = <ref>{{FirstPeoplesRefVIC|access-date=2026-04-16}}</ref>.
Template Referenced Site {{FirstPeoplesRefVIC}} Map of formally recognised Traditional Owners (Victoria)
Dist#, Dir# and Location#
This is the distance and approximate direction from another location. The '#' is replaced with a number between 1 and 5. Therefore, five locations can be listed, using |location1= through |location5=. The distances can be listed using |dist1= through |dist5=. Direction from the locations is optional, and can be specified using |dir1= through |dir5=.
Population from Wikidata
If the |pop= parameter is left empty or not supplied, the template will attempt to retrieve population data from Wikidata. For more information, see the documentation of Module:PopulationFromWikidata.
Where to find information
- Wikipedia:WikiProject Australian places#Useful Resources
- Australian Bureau of Statistics
- LGA links for each state
- Climate Data Online at the Bureau of Meteorology
Tracking categories
- Category:Australian place articles using Wikidata population values (1) – articles that display population values from Wikidata, rather than directly via the
|pop=parameter.
Deprecated parameters
- Category:Australian place articles using missing parameters (2) – articles that include deprecated parameters are automatically added. As of 5 April 2016, the tracked parameters are
|imagesize=,|image2size=,|imagesize2=,|image_alt2=,|logosize=and|official_site=.
Errors
- Category:Australian place articles using missing parameters (2) – articles that contain general errors are automatically added.
- Category:Australian place articles with no population year (3) – articles missing
|pop_year=or|pop2_year=parameters are automatically added. - Category:Australian place articles with no population footnotes (3) – articles missing
|pop_footnotes=or|pop2_footnotes=parameters are automatically added. - Category:Australian place articles with density errors (0)
- Category:Pages using infobox Australian place with unknown parameters (1) – articles using parameters that are not included in the infobox. This category may include articles with incorrectly spelled parameters.
- Category:Pages using infobox Australian place with conflicting parameters (0)
Temporary
- Category:Pages using infobox Australian place with lga type and location map (0)
- Category:Pages using infobox Australian place with an implicitly suppressed location map (0)
- Category:Pages using infobox Australian place with an explicitly suppressed location map (2)
Subpages
- Template:Infobox Australian place
- Template:Infobox Australian place/Blank
- Template:Infobox Australian place/Examples
- Template:Infobox Australian place/doc
- Template:Infobox Australian place/sandbox
- Template:Infobox Australian place/sandbox/doc
- Template:Infobox Australian place/testcases
Microformat
The HTML mark up produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue article across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.
hCard uses HTML classes including:
- "adr"
- "county-name"
- "fn"
- "label"
- "locality"
- "nickname"
- "note"
- "org"
- "region"
- "street-address"
- "vcard"
Geo is produced by calling {{coord}}, and uses HTML classes:
- "geo"
- "latitude"
- "longitude"
Please do not rename or remove these classes.
When giving coordinates, please don't be overly precise.
TemplateData
TemplateData documentation used by VisualEditor and other tools
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
See the monthly error report for this template. TemplateData for Infobox Australian place Display information about a place in Australia in a standard infobox format.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||